Fence Posts, Clips & Fixings
Perimeter & Security Fencing
Priced on enquiry
Priced against quantity and the panel system it has to fit — a clip for a 2 m twin-wire panel is not the clip for a 1.2 m 3D one.
Tell us the size and where it is going.
About this product
- What it is: Posts, clips, connectors, anchors and caps for twin-wire (2D) and 3D welded mesh panel…
- H-profile post: 70 × 44 mm, 1.25 mm wall, pre-drilled for clips, bolts and panel retaining hooks.
- Post finish: Hot-dip galvanised both sides plus powder coat, minimum 60 microns.
- Security clip: Stainless steel anti-theft bolt with a break-off head — the head shears at torque, so the…
- Anchor: 4 bolts per base plate. Expansion or chemical anchor to suit the footing.
- Post cap: Protective cap with an integrated hook that supports the panel while it is being fixed.
All 13 items
Every item on one list. Tap any row to ask about that one.
| Size / product | Details | Enquire |
|---|---|---|
| H-profile post 70 × 44 × 1.25 mm — 1.5 m | Pre-drilled · welded base plate · HDG + powder coat ≥60 µm · for panels to 1230 mm | Ask |
| H-profile post 70 × 44 × 1.25 mm — 2.0 m | Pre-drilled · welded base plate · for panels to 1630 mm | Ask |
| H-profile post 70 × 44 × 1.25 mm — 2.4 m | Pre-drilled · welded base plate · the post for a 2030 mm panel · 6.0-6.5 kg with base plate and cap, depending on the roll form | Ask |
| H-profile post 70 × 44 × 1.25 mm — 3.0 m | Pre-drilled · welded base plate · for 2430 mm panels and barbed-arm tops | Ask |
| Corner post, H-profile, pre-drilled two faces | Drilled on both faces so two panel runs meet at 90° on one post | Ask |
| Security clip set with anti-theft break-off bolt | Stainless bolt, shears at torque · 4 clips a post for a single panel, 8 where two panels meet | Ask |
| Corner connector set | Reinforced angle bracket with bolts and washers, for direction changes that do not fall on a post | Ask |
| Anchor bolt set — 4 per base plate | M10 or M12 expansion anchor · chemical anchor for cracked or thin slabs | Ask |
| Post cap with integrated panel-support hook | Holds the panel while it is fixed · not the same as a plain plug cap | Ask |
| Post cap, plain — plastic or steel | Weather cap only, no hook | Ask |
| Panel clamp / clip for 3D mesh | Standard 3D mesh clamp with bolt · 4 a panel | Ask |
| Bent-arm extension, single or double | Barbed-wire arm bolted to the post top · single 45° or double V | Ask |
| Barbed top option on welded mesh panel | Vertical wire ends left barbed, 30 ± 2 mm · specified at manufacture, not added afterwards | Ask |
- Pre-drilled · welded base plate · HDG + powder coat ≥60 µm · for panels to 1230 mmAsk on WhatsApp
- Pre-drilled · welded base plate · for panels to 1630 mmAsk on WhatsApp
- Pre-drilled · welded base plate · the post for a 2030 mm panel · 6.0-6.5 kg with base plate and cap, depending on the roll formAsk on WhatsApp
- Pre-drilled · welded base plate · for 2430 mm panels and barbed-arm topsAsk on WhatsApp
- Drilled on both faces so two panel runs meet at 90° on one postAsk on WhatsApp
- Stainless bolt, shears at torque · 4 clips a post for a single panel, 8 where two panels meetAsk on WhatsApp
- Reinforced angle bracket with bolts and washers, for direction changes that do not fall on a postAsk on WhatsApp
- M10 or M12 expansion anchor · chemical anchor for cracked or thin slabsAsk on WhatsApp
- Holds the panel while it is fixed · not the same as a plain plug capAsk on WhatsApp
- Weather cap only, no hookAsk on WhatsApp
- Standard 3D mesh clamp with bolt · 4 a panelAsk on WhatsApp
- Barbed-wire arm bolted to the post top · single 45° or double VAsk on WhatsApp
- Vertical wire ends left barbed, 30 ± 2 mm · specified at manufacture, not added afterwardsAsk on WhatsApp
Priced against quantity and the panel system it has to fit — a clip for a 2 m twin-wire panel is not the clip for a 1.2 m 3D one.
What it is
The parts that turn a stack of panels into a fence. Most of the cost of a mesh fence is not the mesh — on a 5,000 m job the posts, clips, connectors and anchors came to more than half the order.
Specification
Everything published for this product. Anything not listed here is not published — ask and we will confirm it for the unit you are buying.
- What it is
- Posts, clips, connectors, anchors and caps for twin-wire (2D) and 3D welded mesh panel systems.
- H-profile post
- 70 × 44 mm, 1.25 mm wall, pre-drilled for clips, bolts and panel retaining hooks. Yield not less than 250 MPa.
- Post finish
- Hot-dip galvanised both sides plus powder coat, minimum 60 microns. RAL 6005 green, RAL 7016 anthracite, RAL 7035 grey.
- Security clip
- Stainless steel anti-theft bolt with a break-off head — the head shears at torque, so the clip cannot be undone with a spanner.
- Anchor
- 4 bolts per base plate. Expansion or chemical anchor to suit the footing.
- Post cap
- Protective cap with an integrated hook that supports the panel while it is being fixed. A plain plug cap does not do this.
- Standards
- BS EN 10223-4 · BS EN 10223-7 for the panels
- Note on yield
- 250 MPa rules out Q235 and S235JR, which are both 235. S250GD, S280GD and S350GD all pass. Confirm against the mill certificate rather than the catalogue.
Technical Procurement & Ordering Guides
10 drawings covering every answer we need to price Fence Posts, Clips & Fixings — every figure comes from the price table above or from the published standard it is made to.
H-profile post70 × 44 × 1.25
1 of 10
Send us the size, wall and length — or send the drawing and we will read it off.
Ready to price your fence posts, clips & fixings?
Send us the size and the site. We quote the same day, and we deliver across all seven Emirates.













