H-profile post 70 × 44 × 1.25 mm — 2.4 m
Pre-drilled · welded base plate · the post for a 2030 mm panel · 6.0-6.5 kg with base plate and cap, depending on the roll form. The parts that turn a stack of panels into a fence. Most of the cost of a mesh fence is not the mesh — on a 5,000 m job the posts, clips, connectors and anchors came to more than half the order.
Published price
H-profile post 70 × 44 × 1.25 mm — 2.4 m
Quoted on the day
Priced against quantity and the panel system it has to fit — a clip for a 2 m twin-wire panel is not the clip for a 1.2 m 3D one.
One message, no form — we reply with the price.
Prices exclude 5% VAT and are subject to change. Bulk discounts available.
Delivered across all 7 Emirates. How delivery works
This size
Pre-drilled · welded base plate · the post for a 2030 mm panel · 6.0-6.5 kg with base plate and cap, depending on the roll form
What this is
- Section
- 70 × 44 mm
- Wall thickness
- 1.25 mm
- Length
- 2.4 m
Taken from the product’s own name, converted where the unit differs, and from the standard where the range cites one. Tell us the application and we will confirm the exact item before you order.
Specification
- What it is
- Posts, clips, connectors, anchors and caps for twin-wire (2D) and 3D welded mesh panel systems.
- H-profile post
- 70 × 44 mm, 1.25 mm wall, pre-drilled for clips, bolts and panel retaining hooks. Yield not less than 250 MPa.
- Post finish
- Hot-dip galvanised both sides plus powder coat, minimum 60 microns. RAL 6005 green, RAL 7016 anthracite, RAL 7035 grey.
- Security clip
- Stainless steel anti-theft bolt with a break-off head — the head shears at torque, so the clip cannot be undone with a spanner.
- Anchor
- 4 bolts per base plate. Expansion or chemical anchor to suit the footing.
- Post cap
- Protective cap with an integrated hook that supports the panel while it is being fixed. A plain plug cap does not do this.
- Standards
- BS EN 10223-4 · BS EN 10223-7 for the panels
- Note on yield
- 250 MPa rules out Q235 and S235JR, which are both 235. S250GD, S280GD and S350GD all pass. Confirm against the mill certificate rather than the catalogue.
Not the right size?
Every option in the Fence Posts, Clips & Fixings range. Tell us the quantity and all of them are quoted together.
- H-profile post 70 × 44 × 1.25 mm — 1.5 m
- H-profile post 70 × 44 × 1.25 mm — 2.0 m
- H-profile post 70 × 44 × 1.25 mm — 3.0 m
- Corner post, H-profile, pre-drilled two faces
- Security clip set with anti-theft break-off bolt
- Corner connector set
- Anchor bolt set — 4 per base plate
- Post cap with integrated panel-support hook
- Post cap, plain — plastic or steel
- Panel clamp / clip for 3D mesh
- Bent-arm extension, single or double
- Barbed top option on welded mesh panel
Technical Procurement & Ordering Guides
10 drawings covering every answer we need to price Fence Posts, Clips & Fixings — every figure comes from the price table above or from the published standard it is made to.
H-profile post70 × 44 × 1.25
1 of 10
Send us the size, wall and length — or send the drawing and we will read it off.
H-profile post 70 × 44 × 1.25 mm — 2.4 m — questions we get asked
Anything not covered here, ask on WhatsApp — you will get a person, not a form reply.