4 products in Roofing & Cladding
Swipe to find yours, then open it for lines, prices and drawings.
Where this is used.
The jobs roofing & cladding actually do. If yours is not on the list, it is still worth asking — most of what we supply ends up somewhere nobody wrote down.
Warehouses & pre-engineered buildings
Insulated sandwich panel for walls and roof, on C and Z purlins, with the flashings that close the ridge, the eaves and the corners.
Portacabins & site accommodation
50 mm wall panel is the usual cabin build; 75 mm where the unit is lived in through a UAE summer and the air conditioning bill matters.
Re-roofing & re-cladding
GI sheet from 0.4 to 0.7 mm. The gauge decides how it spans and how it takes a footfall during maintenance, not just what it costs.
Boundary and screen walls
GI sheet and sandwich panel used vertically as a permanent boundary, where a mesh fence would not give privacy or a wind break.
Canopies, car ports & covered stores
Roof panel over a light steel frame, with the profiles and trims supplied to match so the finished edge is not improvised on site.
Ducting, trays & light framing
Aluminium sheet 0.5 to 1.0 mm where the part has to be folded, is going somewhere corrosive, or simply has to be light.
What we can put in front of your engineer.
Ask for any of it against a specific size and you will get it the same working day.
- Panel core thickness against U-value, so the specification can be checked rather than assumed
- Sheet gauge, effective cover width and weight per square metre
- Purlin section sizes and the span each one is good for
- Which flashings a given roof needs — ridge, eave, barge and corner — and how many metres
We do not publish downloadable datasheets. Where a standard or a certificate is written into your specification, ask us against the specific unit — we will either produce the supplier documentation or tell you plainly that we cannot, rather than leave you to find out at inspection.
What you get with the price.
Stock on the ground
Same-day into Sharjah and the northern emirates for what is in the yard, one to three working days elsewhere.
New and refurbished
Both grades priced side by side on every line, so the budget decision is yours to make, not ours to steer.
Delivered and offloaded
Our own transport across all 7 Emirates, with crane or forklift offloading arranged and quoted before you commit.
Checked before it leaves
Refurbished units are cleaned, repaired and inspected in our own yard rather than shipped on as found.
Bulk and project supply
Send the full requirement rather than line by line — contractor and bulk rates are better than list.
Straight answers
If we cannot meet a specification or evidence a standard, we say so at enquiry stage rather than after the order.
Choosing sheet, panel and profile
A roof or a clad elevation is three separate purchases — the sheet, the structure it fixes to, and the trims that close the edges. Leaving the trims to the end is the usual reason a job stalls on site.