Corner Trim — Aluzinc / aluminium, 3 m
Girth and bend angle set by the corner · colour matched to the sheet. Bent GI and pre-painted sheet metal trims — ridge caps, gutters, corner and end flashings — that finish and weatherproof a panel or sheet roof. Standard length is 3 m; the girth and the bend angle are set by your detail, and the colour is matched to the sheet they finish. GI 0.20–1.20 mm, Aluzinc and aluminium 0.40–2.00 mm. A roof that is watertight everywhere except the ridge and the eaves is not watertight — send the roof detail and the flashings are folded to it.
Published price
Corner Trim — Aluzinc / aluminium, 3 m
Quoted on the day
Made to the exact roof/wall profile and colour on the job, so this is quoted against a sample or profile rather than stocked as a fixed item.
One message, no form — we reply with the price.
Prices exclude 5% VAT and are subject to change. Bulk discounts available.
Delivered across all 7 Emirates. How delivery works
This size
Girth and bend angle set by the corner · colour matched to the sheet.
What this is
- Length
- 3 m
Taken from the product’s own name, converted where the unit differs, and from the standard where the range cites one. Tell us the application and we will confirm the exact item before you order.
Specification
- What it is
- Sheet metal (GI or pre-painted GI) folded to a fixed profile on a brake press, used at every roof and wall junction a flat sheet or panel can't cover on its own - ridges, eaves, corners and openings.
- Who buys it
- Whoever is supplying or fixing the sheet or sandwich panel roof/wall itself - flashings are bought against that same job, since they only fit if they match the panel profile they are finishing.
- Made of
- Same base material as the roof sheet it finishes (plain GI or colour-matched PPGI), bent to the specific profile and lap the job needs.
- Why it matters
- A roof or wall that is watertight everywhere except the ridge and the eaves is not watertight - flashings are what stop wind-driven rain getting in at every joint.
- Ordering
- Made to the actual roof or wall profile and colour on the job - send the panel profile (or a sample) and the running length needed. This is not a stock item picked off a shelf.
- Delivery
- All 7 Emirates from our own yard. Sharjah and the northern emirates are usually same day on stocked lines; the rest of the country is one to three working days. The delivery charge depends on the emirate, the load and the offloading, and is confirmed in writing on the quotation rather than guessed at here.
- Installation service
- Supply only, or supplied and installed by our own crew rather than a subcontractor. Installation is quoted with the goods once we have the site conditions and the access, and is shown as its own line on the quotation.
Not the right size?
Every option in the Flashings & Trims range. Tell us the quantity and all of them are quoted together.
- Ridge Cap — GI, 3 m
- Ridge Cap — Aluzinc / aluminium, 3 m
- Eave / Gutter Flashing — GI, 3 m
- Eave / Gutter Flashing — Aluzinc / aluminium, 3 m
- Corner Trim — GI, 3 m
- Barge / End Flashing — GI, 3 m
- Barge / End Flashing — Aluzinc / aluminium, 3 m
Technical Procurement & Ordering Guides
10 drawings covering every answer we need to price Flashings & Trims — every figure comes from the price table above or from the published standard it is made to.
The four detailsRidge, eave, corner, barge
1 of 10
Send us the size, wall and length — or send the drawing and we will read it off.
Corner Trim — Aluzinc / aluminium, 3 m — questions we get asked
Anything not covered here, ask on WhatsApp — you will get a person, not a form reply.