A ridge cap, folded — the spangle of a galvanised coil across it
Flashings, Trims & Roofing Accessories

Drip Trim, 3 m

Sits at the foot of wall panels so rain drips clear of the base · folded to your detail from GI, Aluzinc or aluminium coil to match the panel · lengths up to 3 m. Bent GI and pre-painted sheet metal trims — ridge caps, gutters, down spouts, corner, drip, cap and end flashings — that finish and weatherproof a panel or sheet roof, plus the fixings and sealing that go with them: self-drilling and self-tapping roof screws with bonded washers, screw caps, sealed rivets, butyl strip, purlin tape, profile filler blocks and silicone. Standard trim length is 3 m; the girth and the bend angle are set by your detail, and the colour is matched to the sheet they finish. GI 0.20–1.20 mm, Aluzinc and aluminium 0.40–2.00 mm.

Price on request

Drip Trim, 3 m

Quoted on the day

Made to the exact roof/wall profile and colour on the job, so this is quoted against a sample or profile rather than stocked as a fixed item.

Ask on WhatsApp

One message, no form — we reply with the price.

Prices exclude 5% VAT and are subject to change. Bulk discounts available.

Delivered across all 7 Emirates. How delivery works

This size

Sits at the foot of wall panels so rain drips clear of the base · folded to your detail from GI, Aluzinc or aluminium coil to match the panel · lengths up to 3 m.

What this is

Length
3 m

Taken from the product’s own name, converted where the unit differs, and from the standard where the range cites one. Tell us the application and we will confirm the exact item before you order.

Specification

What it is
Sheet metal (GI or pre-painted GI) folded to a fixed profile on a brake press, used at every roof and wall junction a flat sheet or panel can't cover on its own - ridges, eaves, corners and openings.
Who buys it
Whoever is supplying or fixing the sheet or sandwich panel roof/wall itself - flashings are bought against that same job, since they only fit if they match the panel profile they are finishing.
Made of
Same base material as the roof sheet it finishes (plain GI or colour-matched PPGI), bent to the specific profile and lap the job needs.
Why it matters
A roof or wall that is watertight everywhere except the ridge and the eaves is not watertight - flashings are what stop wind-driven rain getting in at every joint.
Ordering
Made to the actual roof or wall profile and colour on the job - send the panel profile (or a sample) and the running length needed. This is not a stock item picked off a shelf.
Delivery
All 7 Emirates from stock held in the UAE. Sharjah and the northern emirates are usually same day on stocked lines; the rest of the country is one to three working days. The delivery charge depends on the emirate, the load and the offloading, and is confirmed in writing on the quotation rather than guessed at here.
Installation service
Supply only, or supplied and installed by our own crew rather than a subcontractor. Installation is quoted with the goods once we have the site conditions and the access, and is shown as its own line on the quotation.
Flashings, Trims & Roofing Accessories

Technical Procurement & Ordering Guides

10 drawings covering every answer we need to price Flashings, Trims & Roofing Accessories — every figure comes from the price table above or from the published standard it is made to.

The four detailsRidge, eave, corner, barge

1 of 10

WhatsApp us

Send us the size, wall and length — or send the drawing and we will read it off.

Drip Trim, 3 m — questions we get asked

Anything not covered here, ask on WhatsApp — you will get a person, not a form reply.

Drip Trim, 3 m is priced against your quantity and specification rather than carried at a list figure, because the rate moves with the volume and the delivery. Send the quantity and the emirate on WhatsApp or through the quotation form and you will have a written price, with VAT and delivery shown separately, the same working day.

Sits at the foot of wall panels so rain drips clear of the base · folded to your detail from GI, Aluzinc or aluminium coil to match the panel · lengths up to 3 m. It is part of our Flashings, Trims & Roofing Accessories range under Roofing & Cladding, held in stock in the UAE.

Yes — to all 7 Emirates. Sharjah and the northern emirates are usually same day on stocked items, and the rest of the country is one to three working days. The delivery charge depends on the emirate, the load and the offloading, so it is quoted separately and shown on the written quotation rather than guessed at here.

Yes. Contractors, facilities companies, workshops and site suppliers are most of what we do, and volume pricing applies above trade quantities. Send the full list rather than one line and we will price the whole package. Standard terms are 100% advance payment on order confirmation, with credit terms available to verified repeat clients.

There are 12 lines in the Flashings, Trims & Roofing Accessories range, each with its own published price on this site. If the exact variant you need is not listed, ask — a good deal of our stock moves faster than the page does.
Get in touch

Need this delivered?

Tell us the quantity and the emirate and we will confirm the price, the lead time and the offloading before you commit.

Mon–Sat, 8:00 AM – 6:00 PM · +971 50 910 9633 (Operations Director) · +971 54 147 0736 (Managing Director)