
Aluminium Equal Angle 40 × 40 mm
Extruded aluminium equal angle (6061 / 6063), both legs 40 mm · thickness to order · mill finish, anodised or powder coated. Hot-rolled structural steel for frames, mezzanines, canopies and fabrication: IPE I-beams, HEA and HEB wide-flange beams, equal angles, hot-rolled and cold-rolled sheet and plate, galvanised floor decking and aluminium angle.
Price on request
Aluminium Equal Angle 40 × 40 mm
Quoted on the day
Structural steel moves with the mill price, so beams, angles and plate are quoted on the day against the section, grade, lengths and tonnage rather than published.
One message, no form — we reply with the price.
Prices exclude 5% VAT and are subject to change. Bulk discounts available.
Delivered across all 7 Emirates. How delivery works
This size
Extruded aluminium equal angle (6061 / 6063), both legs 40 mm · thickness to order · mill finish, anodised or powder coated.
What this is
- Section
- 40 × 40 mm
Taken from the product’s own name, converted where the unit differs, and from the standard where the range cites one. Tell us the application and we will confirm the exact item before you order.
Specification
- What it is
- Hot-rolled mild steel sections and flat product. Beams and angles carry the load in a steel frame; plate and sheet are cut and fabricated; decking is the permanent formwork for a concrete floor on steel.
- Beams
- IPE 100 to IPE 600 (European I-beam) and HEA / HEB 100 to 300 (wide-flange H-beam; HEB is the heavier series). 6 m and 12 m lengths. The kg per metre on each line is the standard section-table weight.
- Angles
- Equal angles 20 × 20 to 200 × 200 mm, 3–12 mm thick, 6 m lengths (12 m to order). Black, galvanised or red-oxide primed. Aluminium angle 20 × 20 to 100 × 100 mm in 6061 / 6063.
- Sheet and plate
- Hot-rolled 1.2–20 mm, widths 800–2000 mm. Cold-rolled 0.3–3.0 mm, widths 600–1500 mm, for folding, pressing and painting. Cut sheets or coil.
- Decking
- Galvanised composite floor deck 0.8–1.5 mm, cut to the span up to 12 m.
- Standards
- Hot-rolled: EN 10025 (S275JR / S355JR), ASTM A36 / A572, IS 2062. Cold-rolled: EN 10130, ASTM A1008. Mill certificates on request.
- Sold by
- Beams, sheet and plate by weight (per tonne); angles by the length; decking per square metre.
- Delivery
- All 7 Emirates from stock held in the UAE. Sharjah and the northern emirates are usually same day on stocked lines; the rest of the country is one to three working days. The delivery charge depends on the emirate, the load and the offloading, and is confirmed in writing on the quotation rather than guessed at here.
- Ordering
- Tell us the section or thickness, the grade, the lengths and the quantity. Cutting to length can be quoted with the steel.
Not the right size?
Every option in the Structural Steel — Beams, Angles, Plate & Decking range. Tell us the quantity and all of them are quoted together.
- Equal Angle 20 × 20 mm
- Equal Angle 25 × 25 mm
- Equal Angle 30 × 30 mm
- Equal Angle 40 × 40 mm
- Equal Angle 50 × 50 mm
- Equal Angle 60 × 60 mm
- Equal Angle 65 × 65 mm
- Equal Angle 75 × 75 mm
- Equal Angle 80 × 80 mm
- Equal Angle 100 × 100 mm
- Equal Angle 120 × 120 mm
- Equal Angle 150 × 150 mm
Aluminium Equal Angle 40 × 40 mm — questions we get asked
Anything not covered here, ask on WhatsApp — you will get a person, not a form reply.
