Beam and channel sections stacked in the yard, ends toward you
Structural Steel — Beams, Angles, Plate & Decking

Equal Angle 60 × 60 mm

Hot-rolled mild steel equal angle, both legs 60 mm · thickness to order · 6 m standard length, 12 m to order · black, galvanised or red-oxide primed. Hot-rolled structural steel for frames, mezzanines, canopies and fabrication: IPE I-beams, HEA and HEB wide-flange beams, equal angles, hot-rolled and cold-rolled sheet and plate, galvanised floor decking and aluminium angle.

Price on request

Equal Angle 60 × 60 mm

Quoted on the day

Structural steel moves with the mill price, so beams, angles and plate are quoted on the day against the section, grade, lengths and tonnage rather than published.

Ask on WhatsApp

One message, no form — we reply with the price.

Prices exclude 5% VAT and are subject to change. Bulk discounts available.

Delivered across all 7 Emirates. How delivery works

This size

Hot-rolled mild steel equal angle, both legs 60 mm · thickness to order · 6 m standard length, 12 m to order · black, galvanised or red-oxide primed.

What this is

Section
60 × 60 mm

Taken from the product’s own name, converted where the unit differs, and from the standard where the range cites one. Tell us the application and we will confirm the exact item before you order.

Specification

What it is
Hot-rolled mild steel sections and flat product. Beams and angles carry the load in a steel frame; plate and sheet are cut and fabricated; decking is the permanent formwork for a concrete floor on steel.
Beams
IPE 100 to IPE 600 (European I-beam) and HEA / HEB 100 to 300 (wide-flange H-beam; HEB is the heavier series). 6 m and 12 m lengths. The kg per metre on each line is the standard section-table weight.
Angles
Equal angles 20 × 20 to 200 × 200 mm, 3–12 mm thick, 6 m lengths (12 m to order). Black, galvanised or red-oxide primed. Aluminium angle 20 × 20 to 100 × 100 mm in 6061 / 6063.
Sheet and plate
Hot-rolled 1.2–20 mm, widths 800–2000 mm. Cold-rolled 0.3–3.0 mm, widths 600–1500 mm, for folding, pressing and painting. Cut sheets or coil.
Decking
Galvanised composite floor deck 0.8–1.5 mm, cut to the span up to 12 m.
Standards
Hot-rolled: EN 10025 (S275JR / S355JR), ASTM A36 / A572, IS 2062. Cold-rolled: EN 10130, ASTM A1008. Mill certificates on request.
Sold by
Beams, sheet and plate by weight (per tonne); angles by the length; decking per square metre.
Delivery
All 7 Emirates from stock held in the UAE. Sharjah and the northern emirates are usually same day on stocked lines; the rest of the country is one to three working days. The delivery charge depends on the emirate, the load and the offloading, and is confirmed in writing on the quotation rather than guessed at here.
Ordering
Tell us the section or thickness, the grade, the lengths and the quantity. Cutting to length can be quoted with the steel.

Equal Angle 60 × 60 mm — questions we get asked

Anything not covered here, ask on WhatsApp — you will get a person, not a form reply.

Equal Angle 60 × 60 mm is priced against your quantity and specification rather than carried at a list figure, because the rate moves with the volume and the delivery. Send the quantity and the emirate on WhatsApp or through the quotation form and you will have a written price, with VAT and delivery shown separately, the same working day.

Hot-rolled mild steel equal angle, both legs 60 mm · thickness to order · 6 m standard length, 12 m to order · black, galvanised or red-oxide primed. It is part of our Structural Steel — Beams, Angles, Plate & Decking range under Steel Framing, Studs & Sections, held in stock in the UAE.

Yes — to all 7 Emirates. Sharjah and the northern emirates are usually same day on stocked items, and the rest of the country is one to three working days. The delivery charge depends on the emirate, the load and the offloading, so it is quoted separately and shown on the written quotation rather than guessed at here.

Yes. Contractors, facilities companies, workshops and site suppliers are most of what we do, and volume pricing applies above trade quantities. Send the full list rather than one line and we will price the whole package. Standard terms are 100% advance payment on order confirmation, with credit terms available to verified repeat clients.

There are 12 lines in the Structural Steel — Beams, Angles, Plate & Decking range, each with its own published price on this site. If the exact variant you need is not listed, ask — a good deal of our stock moves faster than the page does.
Get in touch

Need this delivered?

Tell us the quantity and the emirate and we will confirm the price, the lead time and the offloading before you commit.

Mon–Sat, 8:00 AM – 6:00 PM · +971 50 910 9633 (Operations Director) · +971 54 147 0736 (Managing Director)