Wall Panel — 50mm core
PPGI steel skins both faces around a 50 mm rigid PUF core, tongue-and-groove jointed and screw-fixed to a steel purlin or girt frame. The standard core for warehouse and workshop wall cladding where insulation matters but the load is not extreme. PUF-core sandwich panels for warehouse and cold-store walls and roofs, and for cabin construction - one board, two skins, insulation in between.
Published price
Wall Panel — 50mm core
Quoted on the day
Core thickness, fire rating and the actual wall/roof area all change the material take-off, so this is quoted against your dimensions rather than published per sheet.
One message, no form — we reply with the price.
Prices exclude 5% VAT and are subject to change. Bulk discounts available.
Delivered across all 7 Emirates. How delivery works
How many panels for your roof or wall?
Enter the area and the run length, and get panels and metres.
You need
- Panels, 6 m long1000 mm cover each32 panels
- Total panel length to order192 linear m
- Area being clad180 m²
How that was worked out
- 30 m + 5% = 31.5 m to cover
- 31.5 m ÷ 1.00 m cover per panel = 31.5 → 32 panels
- 32 panels × 6 m = 192 linear metres
This size
PPGI steel skins both faces around a 50 mm rigid PUF core, tongue-and-groove jointed and screw-fixed to a steel purlin or girt frame. The standard core for warehouse and workshop wall cladding where insulation matters but the load is not extreme.
What this is
- Core thickness
- 50 mm
Taken from the product’s own name, converted where the unit differs, and from the standard where the range cites one. Tell us the application and we will confirm the exact item before you order.
Specification
- Panel, or a finished boundary wall?
- This page is the PANEL on its own — bought by the piece and screw-fixed to a steel frame you already have, for a warehouse, workshop or cold-store wall or roof. If what you want is a finished wall around a plot, standing on its own posts and footings and priced per running metre, that is our Sandwich Panel Boundary Fence. Same panel, different job.
- What it is
- A prefabricated composite board: two pre-painted galvanized steel (PPGI) skins bonded either side of a rigid polyurethane (PUF) foam core, tongue-and-groove jointed so panels lock edge to edge.
- Made of
- PPGI steel skins (typically 0.4–0.5 mm) either side of a rigid PUF foam core, standard density around 40 kg/m³.
- Thicknesses
- 50 mm and 75 mm cores are the common wall/roof stock; thicker cores available to order for cold-store work.
- Fire behaviour
- Standard PUF core is combustible. A fire-rated or mineral-wool core version exists and should be specified for any Civil Defence-reviewed building.
- Installation
- Wall panels run vertically, screw-fixed to a steel purlin or girt frame at each rib; roof panels laid to a minimum pitch with ridge and eave flashing.
Not the right size?
Every option in the Insulated Sandwich Panels range. Tell us the quantity and all of them are quoted together.
Back to the full Insulated Sandwich Panels tableTechnical Procurement & Ordering Guides
10 drawings covering every answer we need to price Insulated Sandwich Panels — every figure comes from the price table above or from the published standard it is made to.
The panelPPGI, PUF, PPGI
1 of 10
Send us the size, wall and length — or send the drawing and we will read it off.
Wall Panel — 50mm core — questions we get asked
Anything not covered here, ask on WhatsApp — you will get a person, not a form reply.