

Roof Panel — 200mm core (PIR)
PPGI steel skins around a 200 mm polyisocyanurate (PIR) core, formed to the 35/200 roof profile · 1000 mm cover · up to 12 m long. PIR is the core to specify where fire performance matters. PUR and PIR-core sandwich panels for warehouse walls and roofs, cold stores and cabin construction - one board, two skins, insulation in between.
Price on request
Roof Panel — 200mm core (PIR)
Quoted on the day
Core thickness, fire rating and the actual wall/roof area all change the material take-off, so this is quoted against your dimensions rather than published per sheet.
One message, no form — we reply with the price.
Prices exclude 5% VAT and are subject to change. Bulk discounts available.
Delivered across all 7 Emirates. How delivery works
How many panels for your roof or wall?
Enter the area and the run length, and get panels and metres.
You need
- Panels, 6 m long1000 mm cover each32 panels
- Total panel length to order192 linear m
- Area being clad180 m²
How that was worked out
- 30 m + 5% = 31.5 m to cover
- 31.5 m ÷ 1.00 m cover per panel = 31.5 → 32 panels
- 32 panels × 6 m = 192 linear metres
This size
PPGI steel skins around a 200 mm polyisocyanurate (PIR) core, formed to the 35/200 roof profile · 1000 mm cover · up to 12 m long. PIR is the core to specify where fire performance matters.
What this is
- Core thickness
- 200 mm
Taken from the product’s own name, converted where the unit differs, and from the standard where the range cites one. Tell us the application and we will confirm the exact item before you order.
Specification
- Panel, or a finished boundary wall?
- This page is the PANEL on its own — bought by the piece and screw-fixed to a steel frame you already have, for a warehouse, workshop or cold-store wall or roof. If what you want is a finished wall around a plot, standing on its own posts and footings and priced per running metre, that is our Sandwich Panel Boundary Fence. Same panel, different job.
- What it is
- A prefabricated composite board: two pre-painted galvanized steel (PPGI) skins bonded either side of a rigid foam core - polyurethane (PUR, also called PUF) or polyisocyanurate (PIR) - tongue-and-groove jointed so panels lock edge to edge. Cold-store panels use a slip joint instead.
- Made of
- PPGI steel skins (typically 0.4–0.5 mm) either side of a rigid PUR or PIR foam core, standard density around 40 kg/m³.
- Thicknesses
- Roof and wall panels with 40 to 200 mm cores, 1000 mm cover, up to 12 m long. Cold-store panels 50 to 200 mm. 50 and 75 mm are the common wall and roof stock.
- Fire behaviour
- Standard PUR core is combustible. PIR performs better in fire and is the core to specify where that matters; a mineral-wool core exists and should be specified for any Civil Defence-reviewed building.
- Installation
- Wall panels run vertically, screw-fixed to a steel purlin or girt frame at each rib; roof panels laid to a minimum pitch with ridge and eave flashing.
Not the right size?
Every option in the Insulated Sandwich Panels range. Tell us the quantity and all of them are quoted together.
- Wall Panel — 50mm core
- Wall Panel — 75mm core
- Roof Panel — 50mm core
- PUF Core Board (bare)
- Roof Panel — 40mm core (PUR)
- Roof Panel — 75mm core (PUR)
- Roof Panel — 100mm core (PUR)
- Roof Panel — 120mm core (PUR)
- Roof Panel — 150mm core (PUR)
- Roof Panel — 200mm core (PUR)
- Roof Panel — 40mm core (PIR)
- Roof Panel — 50mm core (PIR)
Technical Procurement & Ordering Guides
10 drawings covering every answer we need to price Insulated Sandwich Panels — every figure comes from the price table above or from the published standard it is made to.
The panelPPGI, PUF, PPGI
1 of 10
Send us the size, wall and length — or send the drawing and we will read it off.
Roof Panel — 200mm core (PIR) — questions we get asked
Anything not covered here, ask on WhatsApp — you will get a person, not a form reply.




