C-Channel — 48 mm × 3 m
0.35–0.90 mm base metal · the width is the stud size, so it must match the track. Roll-formed galvanized steel channel and profile sections — the structural frame behind hoarding, cladding and drywall. C-channel studs from 48 to 150 mm and matching U-channel track, both 3 m standard, in 0.35–0.90 mm. Z-purlins 142 to 302 mm deep in 1.5–3.0 mm, cut to length up to 12 m. Order the track to match the stud: the width is the same number on both. Track is stocked in 50, 70, 89, 92, 100 and 150 mm, so ask before specifying a 48, 64 or 123 mm stud.
Published price
C-Channel — 48 mm × 3 m
Quoted on the day
Section, thickness and length are set by the job's engineering, so this is quoted against your bill of materials.
One message, no form — we reply with the price.
Prices exclude 5% VAT and are subject to change. Bulk discounts available.
Delivered across all 7 Emirates. How delivery works
This size
0.35–0.90 mm base metal · the width is the stud size, so it must match the track.
What this is
- Width
- 48 mm
- Length
- 3 m
Taken from the product’s own name, converted where the unit differs, and from the standard where the range cites one. Tell us the application and we will confirm the exact item before you order.
Specification
- What it is
- Cold roll-formed galvanized steel sections, bent from coil to a fixed cross-section (C, U, Z or angle), used as the frame that panels, cladding or drywall board get fixed to.
- Who buys it
- Hoarding and cladding contractors framing behind sandwich panel or GI sheet, drywall/partition contractors, and fabricators building light steel frames.
- Made of
- Galvanized steel coil, roll-formed to section then cut to length - the zinc coating (galvanizing) is what lets it sit outdoors without painting.
- Common sections
- C-channel and U-channel for framing and track, Z-purlin for roof/wall girts spanning between main steel, angle section for bracing and trims.
- Installation
- Bolted or screw-fixed to the primary steel structure at the spacing the panel or cladding manufacturer specifies - purlin spacing is set by the wind load and panel span, not a fixed number.
- Delivery
- All 7 Emirates from our own yard. Sharjah and the northern emirates are usually same day on stocked lines; the rest of the country is one to three working days. The delivery charge depends on the emirate, the load and the offloading, and is confirmed in writing on the quotation rather than guessed at here.
- Ordering
- Cut to length on request. Priced per length or per project quantity against a bill of materials, excluding 5% VAT.
Not the right size?
Every option in the GI Channels & Profiles range. Tell us the quantity and all of them are quoted together.
- C-Channel — 50 mm × 3 m
- C-Channel — 64 mm × 3 m
- C-Channel — 70 mm × 3 m
- C-Channel — 92 mm × 3 m
- C-Channel — 100 mm × 3 m
- C-Channel — 123 mm × 3 m
- C-Channel — 150 mm × 3 m
- U-Channel (track) — 50 mm × 3 m
- U-Channel (track) — 70 mm × 3 m
- U-Channel (track) — 92 mm × 3 m
- U-Channel (track) — 100 mm × 3 m
- U-Channel (track) — 150 mm × 3 m
Technical Procurement & Ordering Guides
10 drawings covering every answer we need to price GI Channels & Profiles — every figure comes from the price table above or from the published standard it is made to.
The profilesC, U, Z and angle
1 of 10
Send us the size, wall and length — or send the drawing and we will read it off.
C-Channel — 48 mm × 3 m — questions we get asked
Anything not covered here, ask on WhatsApp — you will get a person, not a form reply.